RecountRoof · Contractor FAQ

Straight answers about how RecountRoof works.

RecountRoof is supplement software for U.S. roofing contractors. It checks the adjuster estimate against your measurement report, the shingle manufacturer and local code, and drafts the supplement, adjuster replies and material order for you to review.

Questions & answers

What contractors should know

12 answers

Roofing contractors anywhere in the United States who supplement insurance estimates. Code references work nationwide: a hand-checked list for the Denver metro and Colorado, a built-in baseline for all 50 states, and a lookup that finds any city’s or county’s adopted code online, with links to the sources, for you to confirm.

You upload the adjuster estimate and a measurement report. RecountRoof reads both, compares the roofing line items with the measurements, the shingle manufacturer’s installation requirements and the IRC edition your jurisdiction adopted, and flags what is missing or short, with the math and the reference. It then drafts an editable supplement request, can draft a point-by-point reply to the adjuster’s email, and builds a printable material order for the supply house.

The adjuster estimate PDF (Xactimate or the carrier’s format) and a measurement report from EagleView, Hover, GAF QuickMeasure or Roofr, ideally as PDF. Job photos can be saved to the claim as evidence. RecountRoof reads the claim number, carrier, insured and address from the estimate automatically.

Tear-off, shingles and waste, underlayment (net of ice and water), drip edge, starter, hip and ridge cap, ice and water, valley metal, step and headwall flashing, steep and high-roof charges, permit, haul-off, pipe jacks, vents and overhead and profit. Items you add in field notes are included too.

Pick the shingle you are installing in Job setup. The check uses that product’s starter layers, rake starter and required hip and ridge products. For example, CertainTeed Presidential Shake expects a two-layer starter at the eaves and Cedar Crest or Mountain Ridge cap. You can also enter custom requirements.

From the property’s jurisdiction, anywhere in the U.S. In Colorado, RecountRoof picks the city or county from a hand-checked list. Elsewhere, enter the city or county and it searches the building department and municipal code for the adopted residential code edition, local roofing amendments, whether an ice barrier is required and the design wind speed, and shows the sources. You confirm or correct it before it’s used, and it cites it like “IRC 2021 R905.2.8.5 as adopted by the City of Dallas.” If nothing official is online, it uses the state baseline and tells you to confirm with the building department.

Yes. Type field notes in plain words, like “24-inch eaves, front porch 7×5 to the inside wall needs full ice and water.” Ice and water courses at the eaves are worked out from the overhang and pitch to reach 24 inches inside the wall, porch areas are added, and felt is reduced to match. You can ask questions about the claim in the same box.

You do. Every finding and draft is editable and nothing is sent automatically. Check the quantities and references, fill in the brackets, and decide what to send.

No. RecountRoof documents the scope of work for contractors. It does not represent homeowners, negotiate insurance claims, or promise any payment or claim outcome.

Only your account. Files are stored privately and served only after checking you own the claim. See the Privacy Policy for details.

Yes. Create a cash job instead of an insurance claim. A cash job is for the material order form only: there is no adjuster scope or supplement. Type in the roof measurements (or upload your EagleView, Hover, GAF QuickMeasure or Roofr report and RecountRoof fills them in), pick the shingle and colors, add redeck or intake ventilation if the job needs it, and print the order for the supply house. Typing measurements is free and a cash job never uses a claim. Reading an uploaded report is free for your first 3, then 10 reads for $9.90.

Your first claim is free, with no credit card. After that there is no subscription: pay $39 per claim, or prepay a pack of 10 for $299, 25 for $625 or 50 for $1,000. Prepaid claims never expire. A claim is charged once, the first time its supplement check runs; re-running the check (up to 10 times) or drafting adjuster replies (up to 25) on the same claim is included. Teams running more than 50 claims a month can contact us about monthly Enterprise pricing with unlimited claims. Cash jobs (material order form only) are separate: free when you type the measurements, and report reads are 3 free, then 10 for $9.90.

Available today

Start with a contractor account.

Create a contractor account